We’re really sorry but we currently have no stock of this product. You can either register below using 'Notify Me' and we will email you when we get more stock, or you can browse alternative items we have available today. Just a small point to note - they might not have the exact features as the product you initially wanted so please be sure to check the details before you buy.
The NETGEAR ProSAFE M4200-10MG-PoE+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac access points. Includes eight full power PoE+ and multi-speed 1G, 2.5G ports for 100 meter cable runs, combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points. NETGEAR Multigigabit Ethernet is compatible with most major wireless and switching vendors managed solutions, and the only one with 8x2.5G to the AP and 2x10G line-rate aggregation to the wiring closet. Plenum rated, slim design and mounting accessories allow for access point placement optimization and cabling efficiency.
Product Description | NETGEAR M4200 Intelligent Edge Series GSM4210P - switch - 10 ports - Managed - rack-mountable | Device Type | Switch - 10 ports - L3 - Managed | Enclosure Type | Side to side airflow rack-mountable 1U | Subtype | 10 Gigabit Ethernet | Ports | 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ | Power Over Ethernet (PoE) | PoE+ | PoE Budget | 240 W | Performance | Switching capacity: 90 Gbps , Throughput: 66.9 Mpps | MAC Address Table Size | 16K entries | Routing Protocol | RIP, static IPv4 routing, static IPv6 routing, MLD | Remote Management Protocol | SNMP, RMON, Telnet, HTTPS, SSH, CLI | Features | DHCP support, VLAN support, IGMP snooping, RSTP support, MLD snooping, 16MB packet buffer | Compliant Standards | IEEE 802.3ad (LACP), IEEE 802.1AX | Power | AC 120/230 V | Localisation | Europe, Americas | Manufacturer Warranty | NETGEAR lifetime warranty |
General | |
Device Type | Switch - 10 ports - L3 - Managed |
Enclosure Type | Side to side airflow rack-mountable 1U |
Subtype | 10 Gigabit Ethernet |
Ports | 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ |
Power Over Ethernet (PoE) | PoE+ |
PoE Budget | 240 W |
Performance | Switching capacity: 90 Gbps , Throughput: 66.9 Mpps |
MAC Address Table Size | 16K entries |
Routing Protocol | RIP, static IPv4 routing, static IPv6 routing, MLD |
Remote Management Protocol | SNMP, RMON, Telnet, HTTPS, SSH, CLI |
Authentication Method | Secure Shell (SSH), RADIUS, TACACS+ |
Features | DHCP support, VLAN support, IGMP snooping, RSTP support, MLD snooping, 16MB packet buffer |
Compliant Standards | IEEE 802.3ad (LACP), IEEE 802.1AX |
Processor | : 800 MHz |
RAM | 1 GB |
Flash Memory | 256 MB |
Expansion / Connectivity | |
Interfaces | 1 x management (Gigabit LAN) 10Base-T/100Base-TX/1000Base-T - RJ-45 - RJ-45 , 1 x serial (console) RJ-45 , 1 x console (mini-USB) , 1 x USB , 6 x 1/2.5G (PoE+) RJ-45 , 2 x 1/2.5G/5G (PoE+) RJ-45 , 2 x 10GBase-X SFP+ , 1 x USB Type A |
Power | |
Power Device | Internal power supply |
Voltage Required | AC 120/230 V |
Power Consumption Operational | 286.1 Watt |
Miscellaneous | |
Rack Mounting Kit | Included |
Localisation | Europe, Americas |
Software / System Requirements | |
Software Included | Drivers & Utilities |
Manufacturer Warranty | |
Service & Support | NETGEAR lifetime warranty |
Pop your email address below and we’ll let you know as soon as this item is back in stock: